TerranScapes ~ Barriers and Obstacles

Road is cast in a very flexible urethane rubber. Road width is ~3.5" and the set includes:

2x 12" straights
1x 6" straight
2x 45 degree bend
1x 90 degree bend
1x three way intersetion

Flexible Road Straights - Unfinished

Flexible Road Curves and Intersection
2x 45 degree bend
1x 90 degree bend
1 three way intersection

Flexible Road Curves and Intersection- Unfinished

Barrels and crates are cast in Tuf Stone and are mounted on a hardboard base. See the youtube video for additional views of these stands.

Solid casting in Ultracal 30 from original molds. Each section is 6" (15 cm) long. Walls come in four variations which are selected from at random.

Fieldstone Walls (Set of 6 stands)

Single piece casts in Tuf Stone based on Hirst Arts molds. These detailed walls vary in length from 2.5" to 6" in length and are 3/4" tall.

See the YouTube video for more views.

Fieldstone Walls (Set of 6 stands)Unfinished

Stands are approximately 3" (7.5cm) high and are based to match the jungle terrain line. Each base has an abundance of highly detailed and varied jungle foliage including vines clinging to the pillars. The pillars feature various primitive carvings and are cut from polystyrene.

Based on plywood the stand averages 13" in diametere. Various sized upright stones ring the stand and the number of stones may vary.

Rock Barriers

Set of 2 rocks measuring 8" long and 3" high. Cast in Tuf Stone

Difficult Ground

UltraCal30 cast rocks mounted on hardboard and measuring approximately 8" in diameter.

Large Granite Rock Stands (Set of 2 stands)

Varying in size from 4" (5cm) to 5" (8cm) in length and up to 3" high, these stands are hand carved from extruded polystyrene foam and based on hardboard. See the youtube video for additional views of these stands.

Rock Outcroppings (Set of 3 stands)

Varying in size from 2" (5cm) to 3.5" (8cm) in length, these stands are cast with a resin shell and are backed by foam. .

Rock Outcroppings (Set of 3 stands) - Unfinished

Varying in size from 2" (5cm) to 3.5" (8cm) in length, these stands are cast with a resin shell and are backed by foam. .

This set of cast trench tops provides a sloped front and a sandbagged top for use in creating below-grade trench terrain. The set includes one 3" long, four 1.5" long, two 1" long, two 90 degree corners, two 45 degree corners and two pairs of angled connector pieces. Total length produced from the set is approximately 1' foot in length (measuring around the corners).

See the YouTube video for a description and suggestions for finishing.

These pieces are cast in Tuf Stone from TerranScapes designed molds based on Hirst Arts blocks. Pictures include painted and unfinished pieces but prices reflect the purchase of a single piece. Colors used to paint the pieces can be altered on request and additional weathering and rusting can be added for an additional charge.

A video of these pieces is available on YouTube.

Generator

Approximately 4" long and 1.5" high.

Missile Monitor

Approximately 2" long and 2.5" high.

Processor

Approximately 4" long and 2.25" high.

Supply Stack

Approximately 3" long and 2" high.

Transformer

Approximately 3" long and 1.5" high.

Fuel Depot (Set of 3)

Approximately 2" long and 2" high. Each pile features 5-6 barrels and a crate.
See the Youtube video of these pieces.

Fuel Depot - Unfinished

Barrels and crates are separate pieces (20 pieces total)

Cast in Tuf Stone and given a wash paint job. Each set includes 6 straights, and two bends (one inward bend and one outward bend). Forms a linear barrier 18" long.

Sandbags - Straight (2 pieces)

Cast in Tuf Stone. Stands are approximately 6" (15 cm) long and 3/4" (2 cm) high.

You can view a video the sandbags on the YouTube.

Sandbags - Curved (2 pieces)

Cast in Tuf Stone. Stands are approximately 3" (15 cm) long and 3/4" (2 cm) high. Sandbag corners come in two variations which are selected from at random.

Craters

These craters are cast in resin/plastic The craters have openings that vary from 3.5" to 2" across.

Craters - Martian Finish

These are the the same craters listed above. They are painted to match the Martian Modular Board set.

These tank traps are styrene I-beams. 'Welded' together, they pose a hazard to tread vehicles and were widely used in many wars. The bars are painted to model rusting iron.

Stands are approximately 1/2" (1.25 cm) high and 6" (15 cm) long. The uprights are styrene angle iron which is firmly 'buried' in the base. The uprights are painted to model rusting iron.